Features

G-4000 Garaga garage door
  • Thickness of the door 13⁄4 in. (44.5 mm).

  • Clear anodized or White pre-painted tubular extrusions.

  • Top-to-bottom end extrusion 3 1⁄4 in. (82.5 mm) at perimeter.

  • Double hinge end extrusion, 6 1⁄4 in. (159 mm) in option if required.

  • Thickness of tubular extrusions: 0.125 in. (3.2 mm) at hinge fastening points.

  • Weatherstripping between sections.

  • Bottom panel weatherstripping.

  • Rigid vinyl (PVC) pane moulding.

  • Center hinge equally spaced.

  • Integral reinforcement struts (for doors 14 feet (4267 mm) wide and over, 3 or more consecutive G-4000 sections.*

  • Kick proof panel, pre-painted aluminum, choice of 11 colours including anodized, panel only.




Price comparison*


Door model 

Price difference compared
to the G-5000 

G-1000 (aluminum of 0,60 mm)
R-16 (k=0,357 W/m 2 K) 		120
G-2000 (23 gauge steel)
R-16 (k=0,357 W/m 2 K) 		133
G-3000 (20/23 gauge steel)
R-16 (k=0,357 W/m 2 K) 		146
G-4000 (station service door)
R: not applicable 		Because this door is fully glazed, it is
difficult to compare with others.
G-5000 (26 gauge steel)
R-16 (k=0,357 W/m 2 K) 		100
G-7000 (26 gauge steel)
R-12 (k=0,476 W/m 2 K) 		95
G-8000 (24 gauge steel)
Non-insulated 		55
G-8500 (24 gauge steel)
R-6.6 (k=0,860 W/m 2 K) 		75


* For a door of the same dimensions and with the same hardware system. Installation included. Manual operation. Price comparison may vary depending on the cost of the door opener and accessories.


Download the brochure PDF Document  (404 Kb)

Colors


The G-4000 with aluminum extrusions is made with Clear Anodized or Pre-Painted White.
 


 

Panels


 Clear Anodized G-4000 Garaga garage door      Clear Anodized kick proof G-4000 Garaga garage door

     Clear Anodized               Clear Anodized

                                             with Kick Proof

Windows


We offer a wide choice of thermo, clear or tinted panes, acrylic or polycarbonate panes, tempered panes. Contact our customer service to order any other type of window.


 

 

Hardware System


  • 13 or 14-gauge, 2 inch (51 mm) commercial track (for doors up to 180 kg (396 lbs) or 10 m2 (108 sqft)) or 12-gauge, 3 inch (75 mm) industrial tracks.

  • Torsion spring.

  • Sturdy galvanized steel hardware suited for the intended use of the door

 




Hardware

Available sizes


Widths: from 4’ to 18', from 1219 mm to 5486 mm increments


Heights: from 6’ to 14’, from 1829 mm to 4267 mm

 

 

 

Documents to Download

Technical DrawingAutocad Document Autocad (.ZIP file 76 Kb)


Technical DrawingPDF Document (40 Kb)


Technical SpecificationWord Document (104 Kb)


G-4000 BrochurePDF Document (900 Kb)
DSI Door Services, Inc.
45 Mason Street, Salem MA 01970 | Phone: (978) 741-1600
Fax: (978) 741-1441 | Toll Free 1-800-425-0662


Area served: Beverly, Boxford, Danvers, Essex, Georgetown, Gloucester, Hamilton, Ipswich, Lynn, Lynnfield,

Malden, Manchester-by-the-Sea, Marblehead, Melrose, Middleton, North Reading, Peabody, Rockport, Rowley, Salem,

Saugus, Swampscott, Topsfield, Wakefield.

Business hours: Monday to Friday 7am to 5pm; Evenings and weekends by appointment upon request. 

Construction Supervisor: #CS29016
Home Improvement Contractor (HIC) : #161210

 EPA    

IDA  

© Garaga Inc. 2011 | Terms and conditions of use
Garaga